BJSHN - T 204 I (X-2032 I) (NEW FORMULATION)
- MSDS: BJSHN
- Manufacturer: STABOND CORP
- Product Name: T 204 I (X-2032 I) (NEW FORMULATION)
- National Stock Number: 8010-01-057-8512
Product Identification
Product ID:T 204 I (X-2032 I) (NEW FORMULATION)
MSDS Date:04/18/1989
FSC:8010
NIIN:01-057-8512
MSDS Number: BJSHN
Responsible Party
GARDENA, CA 90249
US
Emergency Phone: 213-770-0591
Cage: GO049
Contractor
Telephone: (213) 770-0591
Cage: GO049
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 25 - 30%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 25%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 10%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2.0 AS HG AT 20C)
CAS: 64742-88-7
Fraction By Weight: 5%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Effects of Overexposure:EYE: IRRITATION, REDNESS, SWELLING, STING &
TEARING. SKIN: IRRITATION, REDNESS, BURNING, DRYING & CRACKING.
INHALATION: IRRITATION OF NOSE & THROAT, NERVOUS SYSTEM DEPRESSION.
INGESTION: IRRITATION OF THE DIGESTIVE TRACT, NERVOUS
SYSTEMDEPRESSION, LUNG INFLAMMATION AND DAMAGE.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:EYE: MOVE AWAY FROM EXPOSURE. FLUSH WITH CLEAN WATER FOR AT
LEAST 15 MINUTES. SEEK MEDICAL ATTN. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH AREA WITH SOAP & WATER. SEEK MEDICAL ATTN.
INHALATION: MOVE T O FRESH AIR. MAY NEED ARTIFICIAL RESPIRATION OR
ADMINISTRATION OF OXYGEN. SEEK MEDICAL ATTN. INGESTION: DO NOT
INDUCE VOMITING. NO MOUTH FEEDING. PUT VICTIM ON LEFT SIDE WITH
HEAD DOWN. SEE PHYSICIAN.
Fire Fighting
Flash Point:40.0F,4.4C
Lower Limits:1.0
Upper Limits:N/K
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . APPLY WATER SPRAY TO MINIMIZE VAPOR & COOL CONTAINERS.
AVOID SPREADING BURNING LIQUID.
Unusual Fire/Explosion Hazard:MATERIAL IS FLAMMABLE AND MAY BE IGNITED
BY HEAT, SPARKS, FLAME OR STATIC ELECTRICITY.
Accidental Release
Spill Release Procedures:KEEP SOURCES OF IGNITION AWAY. VENTILATE AREA.
KEEP OUT OF ALL WATERWAYS. USE INERT MATERIAL TO CONTAIN AND DAM.
DO NOT FLUSH WATER. CONTACT FIRE DEPARTMENT.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:USE, STORE WITH ENOUGH VENTILATION.
CONTAINERS MUST BE TIGHTLY CLOSED,COOL,DRY,AWAY FROM IGNITION
SOURCES.COMPLETELY DRAIN EMPTY DRUM. SEE OTHER PREC.
Other Precautions:DO NOT PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL OR
GRIND EMPTY CONTAINERS RETAINING RESIDUE OR EXPOSE TO HEAT.
Exposure Controls
Respiratory Protection:WHEN CONCENTRATIONS EXCEED THE ESTABLISHED
EXPOSURE LIMITS, USE RESPIRATORS OR GAS MASK WITH APPROPRIATE
CARTRIDGES AND CANISTERS (NIOSH APPROVED) OR SUPPLIED AIR
EQUIPMENT. AVOID INHALATION OF VAPORS .
Ventilation:MAINTAIN AIRBORNE CONCENTRATION BELOW ESTABLISHED EXPOS
LIMIT USING VENT/EXHAUST SYSTEM-ALSO SAFE FOR EXPLOSIVE MIXTURES
Protective Gloves:IMPERMEABLE TO MATERIALS. AVOID CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:HAVE A SOURCE OF CLEAN H*20 AVAILABLE IN
WORK AREA FOR FLUSHING EYE & SKIN.IMPERVIOUS CLOTHING SHOULD BE
WORN AS NEEDED.
Work Hygienic Practices:USE GOOD HYGIENE PRACTICE.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:231F,111C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:SEE INGRED
Vapor Density:> AIR
Spec Gravity:0.92
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K
Appearance and Odor:TRANSLUCENT VICOUS SOLUTION WITH BUTYL ALCOHOL ODOR
Percent Volatiles by Volume:77.05
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR BASES, OXIDIZING AGENTS, SELECTED AMINES, ALKALI &
HALOGENS.
Stability Condition to Avoid:STRONG OXIDIZING AGENTS, SOURCES OF
IGNITION, HEAT & FIRE.
Hazardous Decomposition Products:COMBUSTION MAY YIELD CARBON MONOXIDE
AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR
Disposal
Waste Disposal Methods:DISPOSE OF PRODUCT IN ACCORDANCE WITH LOCAL,
COUNTY, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.